![]() Status indication: Green light: indicate power supply. Vibrating fork switches are reliable and perfect for overfill prevention and pump protection applications. Magnetic testing: Output function test performed by putting magnets near the indicated spot This low maintenance device, designed around the tuning fork principle, provides you with point level detection for alarm, monitoring, and control. Supply voltage & output: 12~55 Vdc 3 wire PNP/ NPN Output.ĭensity: >/= 0.7g/cm ³ Viscosity:1~10000 cSt Some Models in Stock Starting at 1,635. Therefore, there is no signal amplification circuit inside, which can eliminate the trouble of frequent sensitivity adjustment due to the material change. 9 products OPTISWITCH 3100 Vibration level switch for solid applications Point level detection of powders and fine-grained bulk solids Probe length: 220 mm / 8.7' Density: <8 g/l / <0.49 lb/ft 3 -50+250☌ / -58+482☏ -116 barg / -14. PRICE 100 - 199 1 IN STOCK LIQUID OR SOLID E+H Liquiphant FTL51B Level Switch Specialized for the process industry and developed according to IEC 61508 to be used directly in SIL2 and SI元 applications, Bluetooth enabled. The product relies on the damping effect by covering the testing material on the tuning fork which reduces the vibration frequency of the tuning fork and outputs a switch signal. It will be converted into the output of the contact signal when the circuit detects the frequency decrease of the signal. When the fork comes into contact with a material, the fork will release some frequency signal as feedback. ![]() The piezoelectric component is used to drive the tuning fork and feedback signal, which produces the resonation on the fork.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |